KTM 65 sx 2011 - Removing the Fork Legs; Installing the Fork Legs

MAINTENANCE WORK ON THE CHASSIS 28
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the
brake discs.
– Always keep the brake discs free of oil and grease, and clean them with
brake cleaner when necessary.
– Clean and oil the dust boots and inner fork tube of both fork legs.
Universal oil spray ( p. 85)
– Press the dust boots back into their normal position.
– Remove excess oil.
– Remove the motorcycle from the lift stand. ( p. 27)
10.5Removing the fork legs x
–
Remove the front wheel. x ( p. 58)
300663-10
– Remove screws  and take off clamp.
– Remove screws  and take off brake caliper.
– Hang the brake caliper and the brake line loosely to the side.
300664-10
– Loosen screw . Remove the left fork leg.
– Loosen screw . Remove the right fork leg.
10.6Installing the fork legs x
Warning
Danger of accidents Modifications to the suspension settings can seriously alter the vehicle's ride behavior.
– Following modifications, ride slowly at first to get the feel of the new ride behavior.
300665-10
– Position the fork legs.
Info
Position the bleeder screw  to the front.