MAINTENANCE WORK ON THE CHASSIS 29
10.9Removing the lower triple clamp x
–
Remove the fork legs. x ( p. 28)
– Dismount the start number plate. ( p. 32)
– Dismount the front fender. ( p. 32)
C00008-10
– Remove fuel tank breather .
– Remove nut . Remove screw , take off top triple clamp with the handlebar and
place it on one side.
Info
Protect the motorcycle and its attachments against damage by covering
them.
Do not bend the cables and lines.
C00009-10
– Remove protective ring .
– Remove the lower triple clamp with the steering stem.
– Remove the upper steering head bearing.
10.10Installing the lower triple clamp x
300668-01
– Clean the bearing and sealing elements, check for damage, and grease.
High viscosity grease ( p. 81)
– Insert the lower triple clamp with the steering stem. Mount the upper steering head
bearing.
– Check whether the top steering head seal is correctly positioned.
– Slide on protective ring .
C00010-10
– Position the upper triple clamp with the steering.
– Mount nut , but do not tighten it yet.
To Next Page
Loading...
Need help?
General
