Kubota 3220 User Manual

３− 10
Section 3 Operation
㸱㸫㸵㸬
Saving the Memory
Saving the setting value enables operation with the same setting value repeatedly.
㹙
1
㹛
Saving the Memory
（1）Settherespectiveparameters.
Refertothefollowingpageforthesettingmethod.
㹙㸱㸫㸲㸬
Setting the Speed
㹛
▶
Refer to page 3-6.
㹙㸱㸫㸳㸬
Setting the Timer
㹛
▶
Refer to page 3-8.
（2）Keeppressinguntilyouhearthebuzzer
(forabout3seconds)the"MEMORY"keyto
whichyouwanttoassignthesettings.
Astothelocationof"MEMORY"key.
▶
Refer to [1-2. Control Panel] on page 1-2.
㹙
2
㹛
Recall the Memory
Pressing"MEMORY"key,thelampislit,
andchoosethelampnumberyouwanttorecall.
㹙
3
㹛
Memory Operation Cancellation
The memory is cancelled with the following method.
Press the "MEMORY" key when the stored
memory is recalled.
The"MEMORY"keylampisturnedoffand
thenormalsettingmodewillbeselected.
1
1
1
1
About 3 seconds
NOTE
The parameters necessary for operation (speed, time) can be stored as memories
with either "MEMORY" 1-3 keys.
NOTE
(YHQLIWKHSRZHULVWXUQHGRႇWKHSDUDPHWHUVVDYHGLQWKHPHPRU\UHPDLQVWRUHG
The last setting is displayed and can be operated.
NOTE
●
When returning to the setting operations, release the memory.
●
While the "MEMORY" key lamp is being turned on, it is not possible to
set the respective parameters.

Kubota 3220 Specifications

General

Brand	Kubota
Model	3220
Category	Laboratory Equipment
Language	English