I
※
Be sure to follow them
※
Since large electrical and mechanical energies are present on the centrifuge and rotor, reasonable
care is required for their handling.
Otherwise, failure may occur resulting in property damages or fatal physical injuries.
In order to prevent them from happening, be sure to follow the instruction given below.
※
Matters Requiring Special Attention Regarding Product Liabilities
※
This machine is not warranted for use if any of the following conditions apply. Furthermore,
KUBOTA will not be held legally liable for machine operation under such circumstances.
●
When the machine is not operated in accordance with the methods stated in the Instruction Manual.
●
When the machine is used beyond the scope of its application indicated in the Instruction Manual.
●
When the accessories or consumables ( e.g. tubes ) used are not those recommended by KUBOTA.
●
When maintenance or repair is performed by any person not approved by KUBOTA.
●
:KHQWKHPDFKLQHLVPRGL¿HGZLWKRXWKDYLQJREWDLQHGSULRUSHUPLVVLRQ
General Notes
WARNING
Pictorial
marks
Contents
Pictorial
marks
Contents
Allowable load
Do not exceed the allowable load of
rotor.
The rotor used beyond the allowable
load level can be damaged, thereby
causing an accident.
Grounding
Do not connect the ground cable to
the following places:
1. Gas piping
([SORVLRQRU¿UHPD\RFFXU
2. Ground cable of lightning
Conductor, or telephone cable.
Electric shock may occur in the
case of lightening.
3. Water pipes
City water pipes may not be
ad equate as a ground since it
may consist of plastic piping.
0RGL¿FDWLRQDQGXQVSHFL¿HGSDUWV
'RQRWPRGLI\QRUXVHXQVSHFL¿HG
parts.
8QDXWKRUL]HGUHWUR¿WRIWKH
centrifuge, rotor or bucket, or use
of unauthorized parts for them can
result in accidents.
While the centrifuge is in operation
While the centrifuge is in operation,
do not stand closer than 30 cm to
avoid a secondary accident.
Maximum speed
Keep the rotor speed below the
maximum speed.
Excessive speed may cause
damage to the rotor and the
centrifuge.
The maximum speed depends
on the rotor strength.
Sterilization
Do not perform dry-heat or autoclave
sterilization with temperatures
KLJKHUWKDQWKRVHVSHFL¿HG
Otherwise, the rotor may deteriorate
and cause an accident.