3SPECIFICATIONS
ENGLISH
NOTE:
*1: Manufacturer's estimate
(The company reserves the right to change the specifications without notice.)
IMPLEMENT LIMITATIONS
The KUBOTA Machine has been thoroughly tested for proper performance with implements sold or approved by KUBOTA.
Use of implements which exceed the maximum loading weight listed below, or which are not recommended for use with
the KUBOTA Machine may result in malfunctions or failures of the machine, damage to other property and injury to the
operator or others.
(Any malfunctions or failures of the machine resulting from use with improper implements are not covered by the warranty.)
Mower
Type RCK54-24G
Cutting width mm 1372
Cutting height mm 25 to102
Adjustment of cutting height Dial gauge
Mounting method Quick joint, Parallel linkage
Weight (Approx.) kg 95
Dimensions
Total length mm 946
Total width mm 1690
Total height mm 273
Discharge direction Right side
Maximum axle loading weight
Front axle
Wf
Rear axle
Wr
Total gross machine
weight
350 kg 550 kg 700 kg
To Next Page
Loading...
Need help?
General
