20 OPERATING THE MOWER
ENGLISH
OPERATING THE MOWER
To avoid serious injury or death:
A Do not operate mower without deflector shield.
To avoid personal injury:
A Clear the work area of objects which might be
picked up and thrown by blades.
A Do not direct the opening of the chute at
bystanders or animals. Ejected objects may
cause injury. Plan your mowing carefully
before starting operation.
A Keep bystanders and animals away from the
mowing area.
A Be sure to disengage the PTO and sit on the
operator's seat before starting the engine.
ADJUSTING CUTTING HEIGHT
To avoid serious injury or death:
A Never engage the PTO and blades in transport
position.
1. To set the cutting height, pull the hydraulic lift lever
backward to raise mower deck to the top position. Turn
the cutting height control dial to adjust height.
2. Set the anti-scalp rollers' height as shown to keep
clearance between rollers and ground more than 6
mm.
3. Lower the mower deck by pushing the hydraulic lift
lever downward. This lowers the mower deck from the
"Transport" position to the "Operating" position.
4. Use the higher settings for mowing in a rough area or
when mowing tall grass. Lower settings should be
used only for smooth lawns where short grass is
desired.
(1) Cutting height control dial
(2) Hydraulic lift lever
(1) Anti-scalp roller
To Next Page
Loading...
Need help?
General
