Kubota WSM F3680 User Manual

6-S6
F2880, F3680, RCK72-F36, RCK72R-F36, RCK60-F36, RCK60R-F36, WSM
STEERING
Power Steering Hose, Pipe and Controller
1. Disconnect the power steering hoses and pipe (3), (4), (5), (6).
2. Unscrew the power steering controller mounting screws (2), and
remove the power steering controller (1).
(When reassembling)
• Be sure to connect the power steering hoses and pipe (3), (4),
(5), (6) to their original position, and tight them to the specified
torque.
(2) Separating Steering Support
Steering Support
1. Removing the seat and panels. (Refer to 6-S5.)
2. Disconnect the power steering hoses and pipe. (Refer to 6-S6.)
3. Remove the steering post covers.
4. Disconnect the accelerator wire (5).
5. Remove the OPC controller (1) and head lamp (2).
6. Unscrew the steering support mounting screw (3), and remove
the steering support (4).
W1014193
Tightening torque
Power steering hose
mounting nut
24.6 to 29.4 N·m
2.5 to 3.0 kgf·m
18.1 to 21.6 ft-lbs
Power steering pipe
mounting nut
54.0 to 63.7 N·m
5.5 to 6.5 kgf·m
39.8 to 47.0 ft-lbs
(1) Power Steering Controller
(2) Power Steering Controller Mounting
Screw
(3) Return Pipe 1
(4) Delivery Hose
(5) Cylinder Hose 1
(6) Cylinder Hose 2
R : R Port
(Connect to Cylinder Hose 2)
L : L Port
(Connect to Cylinder Hose 1)
P : P Port
(Connect to Delivery Hose 1)
T : T Port (Connect to Return Pipe)
(a) Front Side
(1) OPC Controller
(2) Head Lamp
(3) Steering Support Mounting Screw
(4) Steering Support
(5) Accelerator Wire
KiSC issued 04, 2006 A

Kubota WSM F3680 Specifications

General

Brand	Kubota
Model	WSM F3680
Category	Lawn Mower
Language	English