9-S4
F2880, F3680, RCK72-F36, RCK72R-F36, RCK60-F36, RCK60R-F36, WSM
MOWER
[5] MAINTENANCE CHECK LIST
To keep the mower working in good condition as well as to avoid any accident and trouble, carry out periodic
inspection and maintenance. Check the following points before use.
W1013580
Service interval Check Points
Reference
Page
Daily (Each use) Make sure mower blade screws are tightened 9-S5
Check mower blades for wear or damage 9-S5
Check oil leaks –
Check all hardware –
Make sure all pins are in place –
Clean mower deck –
Apply grease to universal joint 9-S5
Apply grease to spindle shafts (Bevel gear shaft and blade shafts) 9-S6
Apply grease to belt tension pulley 9-S6
Apply grease to belt tension pivot 9-S6
Initial 50 hours Change gear box oil 9-S7
Every 50 hours Apply grease to front gauge wheels 9-S7
Apply grease to front roller 9-S7
Check gear box oil 9-S7
Check mower belt 9-S8
Every 150 hours Change gear box oil 9-S8
Every 2 years (After
purchase)
Replace gear box oil seal 9-S8