5-S5
F2880, F3680, RCK72-F36, RCK72R-F36, RCK60-F36, RCK60R-F36, WSM
REAR AXLE
[2] PREPARATION
(1) Separating Rear Axle
Draining Rear Axle Gear Case Oil
1. Place oil pans underneath the rear axle gear case.
2. Remove the drain plug (3) with hexagonal wrench (2), and
remove the oil filler plug (1).
3. Screw in the drain plug.
(When reassembling)
• Fill new oil up to the level of the oil filter plug.
• Apply liquid gasket (Three Bond 1208D or its equivalent) to the
drain plug (3).
■
• Use the specified oil.
Refer to “LUBRICANTS, FUEL AND COOLANT”. (See page
G-7.)
W1011744
Draining Rear Axle Differential Case Oil
1. Place oil pans underneath the rear axle differential case.
2. Remove the drain plug (2) and oil filler plug (1) to drain oil.
3. Screw in the drain plug.
(When reassembling)
• Fill new oil up to the upper level on the oil filler plug.
■
• Use the specified oil.
Refer to “LUBRICANTS, FUEL AND COOLANT”. (See page
G-7.)
W1011954
Rear axle gear case oil Capacity
0.5 L
0.53 U.S.qts.
0.44 Imp.qts.
(1) Oil Filler Plug
(2) Hexagonal Wrench
(3) Drain Plug
Rear axle differential
case oil
Capacity
1.5 L
1.59 U.S.qts.
1.32 Imp.qts.
(1) Oil Filler Plug
(2) Drain Plug
(A) Oil level is acceptable within this
range.