Kubota WSM F3680 User Manual

9-S7
F2880, F3680, RCK72-F36, RCK72R-F36, RCK60-F36, RCK60R-F36, WSM
MOWER
(2) Check Point of Initial 50 Hours
Changing Gear Box Oil
1. Remove the mower from the machine, and place the mower on
level ground.
2. Remove the check plug (2) or oil filler plug (1).
3. Remove the drain plug (3), and drain the used oil completely.
4. After draining the used oil, reinstall the drain plug (3).
5. Fill with new oil up to the check plug level.
IMPORTANT
■
• Use the specified gear oil.
Refer to “LUBRICANTS”. (See page 9-S2.)
W1015494
(3) Check Point of every 50 Hours
Greasing Front Gauge Wheels
1. Grease the grease nipples (1), (2) of the front gauge wheels if the
amount of grease is insufficient.
W1015754
Greasing Front Roller
1. Grease the grease nipples (1) of the front roller if the amount of
grease is insufficient.
W1015909
Checking Gear Box Oil
1. Place the mower on level ground.
2. Remove the oil filler plug (1) or check plug (2), and check to see
that the oil level is just below the check plug (2) port.
3. If the level is too low, add new oil to the prescribed level at the oil
filler plug (1).
IMPORTANT
■
• Use the specified gear oil.
Refer to “LUBRICATING” (See page 9-S2.)
W1018110
(1) Oil Filler Plug
(2) Check Plug
(3) Drain Plug
(1) Grease Nipple
(Front Gauge Wheel Bracket)
(2) Grease Nipple
(Front Gauge Wheel)
(1) Grease Nipple
(1) Oil Filler Plug (2) Check Plug
KiSC issued 04, 2006 A

Kubota WSM F3680 Specifications

General

Brand	Kubota
Model	WSM F3680
Category	Lawn Mower
Language	English