13. STEERING HANDLEBAR/FRONT WHEEL/FRONT
BRAKE/FRONT SHOCK ABSORBER/FRONT FORK
13-4
ZX / SCOUT
Install the handlebar, aligning the tabs of
the handlebar with the grooves in the
steering stem.
Install and tighten the handlebar lock nut.
Torque: 4.55.0kg-m
Lubricate the throttle pipe front end with
grease.
Install the throttle grip and connect the
throttle cable.
The installation sequence is the reverse of
removal.
Install the rear brake lever holder.
Install the front brake master cylinder (disk
brake).
FRONT WHEEL
REMOVAL
Brake Master Cylinde
To Next Page
Loading...
Need help?
General
