Kyocera Brio User Manual

Settings 42
Note: When the incoming ringer volume is set to Silence All or Vibrate All, and when the
playback volume or the tone volume is set to Volume Off, Voice Guide does not work.
(See Volume Settings.)
Select a Vibration Pattern
You can select vibration patterns for incoming calls, messages, alarms, and scheduled events.
1. Press > Settings > Others > Accessibility > Vibrate Type.
2. Select Incoming Calls, Voicemail, Messaging, or Alarm/Calendar.
 If you select Messaging, select Messages or Email.
3. Highlight a vibration pattern and press .
Tip: You can make the incoming ringer vibrate at any volume level by pressing VIBRATE
(left softkey) on the volume setting screen.
Messaging Settings
Your phone’s advanced messaging capabilities let you send and receive different kinds of
messages without placing a voice call.
Messaging settings allow you to create a signature with each sent message and your own
preset messages.
Set Clear Alerts Icon
Set a Callback Number
Add a Customized Signature
Manage Preset Messages
Set Repeated Tone
Set Long Message Reassembly
Set Clear Alerts Icon
Clear Alerts Icon will clear the envelope icon on the display.
1. From standby mode, press MESSAGING (left softkey) > OPTIONS (right softkey) >
Clear Alerts Icon.
2. Press YES (left softkey).
Set a Callback Number
You can specify the callback number your recipients see when you send messages.

Kyocera Brio Specifications

Battery

battery type	870 mAh Lithium ion
battery life	4.71 hours

Display

display size	2.2 inches
display resolution	320 x 240 pixels

Camera

camera resolution	1.3 MP

Connectivity

Bluetooth version	2.0 + EDR
radio frequency	800/1900 MHz
micro USB connector	Yes

Weight and Dimensions

weight	105 g
size	113.5 x 60.0 x 14.5 mm