Kyocera Brio User Manual

Contacts 59
Delete a Contacts Entry or Group
Change the Group Name or Group Icon
1. From standby mode, press CONTACTS (right softkey).
2. Highlight the group you want to edit.
3. Press OPTIONS (right softkey) > Edit Group.
4. Change the group name or the group icon and press .
5. Press SAVE (left softkey).
Add Members to a Group
1. From standby mode, press CONTACTS (right softkey).
2. Highlight the group to which you want to add members.
3. Press OPTIONS (right softkey) > Edit Group > Add More.
4. Read the message and press START (left softkey).
5. Highlight an entry you want to add and press .
 If the desired entry has multiple information of phone number or email address,
select one of them using the right or left navigation key with the entry highlighted.
6. Repeat step 5 to add additional members.
7. Press CONTINUE (left softkey) > SAVE (left softkey).
Remove Members From a Group
1. From standby mode, press CONTACTS (right softkey).
2. Highlight the group from which you want to remove members.
3. Press OPTIONS (right softkey) > Edit Group.
4. Highlight a member and press OPTIONS (right softkey) > Remove from Group > YES
(left softkey).
5. Repeat step 4 to remove additional members.
6. Press SAVE (left softkey).
Delete a Contacts Entry or Group
1. From standby mode, press CONTACTS (right softkey).
2. Highlight an entry or a group you want to delete.

Kyocera Brio Specifications

Battery

battery type	870 mAh Lithium ion
battery life	4.71 hours

Display

display size	2.2 inches
display resolution	320 x 240 pixels

Camera

camera resolution	1.3 MP

Connectivity

Bluetooth version	2.0 + EDR
radio frequency	800/1900 MHz
micro USB connector	Yes

Weight and Dimensions

weight	105 g
size	113.5 x 60.0 x 14.5 mm