Kyocera FS-1118MFP Service Manual

Maintenance
Description
item No.
3JG
1-3-14
U632 Setting communication control 3
Description
Makes settings for fax transmission regarding the communication.
Start
1. Press the enter key. The screen for selecting an item is displayed.
2. Select the item to be set using the up/down cursor keys.
3. Press the enter key. The screen for the selected item appears.
Display Description
1:DIS 4BYTE Sets the DIS signal to 4 bytes.
2:SHORT PROTO TX Sets the short protocol transmission.
3:SHORT PROTO RX Sets the reception of short protocol transmission.
4:NUM OF CNG (F/T) Sets the CNG detection times in the fax/telephone auto select
mode.
Setting the DIS signal to 4 bytes
Sets if bit 33 and later bits of the DIS/DTC signal are sent.
1. Change the setting using the up/down cursor keys.
Display Description
1: ON Bit 33 and later bits of the DIS/DTC signal are not sent.
2: OFF Bit 33 and later bits of the DIS/DTC signal are sent.
2. Press the enter key. The value is set.
3. To return to the screen for selecting an item, press the back key.
Setting the short protocol transmission
Sets if short protocol transmission is performed.
1. Change the setting using the up/down cursor keys.
Display Description
1: ON Short protocol transmission is performed.
2: OFF Short protocol transmission is not performed.
2. Press the enter key. The value is set.
3. To return to the screen for selecting an item, press the back key.
Setting the reception of a short protocol transmission
Selects whether to receive or ignore transmission using short protocol.
If a short protocol transmission is received when an auto switching device is attached to the machine,
communication problems, including auto switching inability, sometimes occur. Change the setting to ignore
short protocol transmission to prevent such problems.
1. Change the setting using the up/down cursor keys.
Display Description
1: ON Receives short protocol transmission.
2: OFF Ignores short protocol transmission.
2. Press the enter key. The value is set.
3. To return to the screen for selecting an item, press the back key.
Setting the CNG detection times in the fax/telephone auto select mode
Sets the CNG detection times in the fax/telephone auto select mode.
1. Change the setting using the up/down cursor keys.
Display Description
1: 1 TIME Detects CNG once.
2: 2 TIMES Detects CNG twice.
2. Press the enter key. The value is set.
3. To return to the screen for selecting an item, press the back key.
Completion
Press the back key at the screen for selecting an item. The screen for selecting a maintenance item No. is
displayed.

Kyocera FS-1118MFP Specifications

General

Print technology	Laser
Maximum resolution	1800 x 600 DPI
Time to first page (black, normal)	8 s
Print speed (black, normal quality, A4/US Letter)	18 ppm
Fax memory	6 MB
Modem speed	33.6 Kbit/s
Dimensions (WxDxH)	496 x 421 x 385 mm
Power requirements	AC 220 ~ 240 V, 50/60 Hz
Networking features	TCP/IP
All-in-one functions	Scan
Standard media sizes	60-105 g/m2, A4, B5, A5, A6, Letter, Legal, Folio 50-sheet multi-purpose tray, 60-163 g/m2, A4, B5, A5, A6, Letter, Legal, Folio, Custom (105 x 148 to 216 x 356 mm), envelopes
Color all-in-one functions	scan, n
Compatible operating systems	Windows 98, 98SE, ME, 2000, XP, NT 4.0
Total input capacity	250 sheets
Total output capacity	150 sheets
Maximum input capacity	550 sheets
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
Internal memory	96 MB
Processor model	750CXr
Processor family	PowerPC
Built-in processor	Yes
Maximum internal memory	320 MB
Sound power level (standby)	43 dB
Sound pressure level (printing)	65 dB
Bundled software	Paper Port Deluxe 9.2
Grayscale levels	256
Certification	TÜV/GS, CE
Maximum duty cycle	10000 pages per month
Power consumption (standby)	76 W
Power consumption (PowerSave)	40 W
Power consumption (average operating)	409 W
Market positioning	Home & office