Lantronix XPress DR User Manual

5: Configuration Using Web Manager
XPress™ DR Industrial Device Server User Guide 35
Channel 1 - Serial Settings Configuration
The Channel 1 configuration defines how the serial ports respond to network and serial
communication.
Serial Settings
To configure the channel’s serial settings:
1. In the Navigation bar, click Serial Settings (organized under Channel 1) to display the Serial
Settings window.
Figure 5-6 Channel Serial Settings
5. Update the following:
Channel 1
Disable Serial Port
When selected, disables communication through the serial port. The
serial port is enabled by default.
Note: This feature is not available on single port device servers, since it
can only be applied to channel 1.
Port Settings
Protocol
From the drop-down menu, select the protocol type for the selected
channel. The default setting is RS232.
Flow Control
Flow control manages data flow between devices in a network to ensure
it is processed efficiently. Too much data arriving before a device is
prepared to manage it causes lost or retransmitted data. None is the
default.

Lantronix XPress DR Specifications

General

Brand	Lantronix
Model	XPress DR
Category	Server
Language	English