XPress™ DR Industrial Device Server User Guide 90
D: Technical Specifications
Table D-1 Technical Specification
CPU, Memory DSTni-EX 48MHz clock, 256 KB RAM
Flash, EEPROM 512 KB flash, 1024Byte EEPROM
Serial Interface RJ45 connector for RS-232 or RS-422/485 interface
Screw Terminals for RS-232 or RS-422/485 interface
Baud Rate selectable from 300 to 115Kbps
Switch selectable RS-232C or RS-422/485 (screw terminals only)
Reset Front panel recessed push button.
Power Input 9-30 VDC, 9-24 VAC, 3 Watts Max, Screw Terminals
Note: The power supply must be a Limited Power Source (LPS).
Dimensions 90 x 60 x 36mm, (3.54 x 2.36 x 1.41 in)
Weight 120g (4.3oz)
Temperature Operating range: 0° to +60°C (32° to 140°F)
Humidity 20% to 90% RH, non-condensing
Case High-Impact Plastic case designed for DIN Rail (35mm)
Protocols Supported ARP, UDP/IP, TCP/IP, Telnet, ICMP, SNMP, DHCP, BOOTP, TFTP, and
HTTP
Network Interface 10Base-T/100Base-TX Ethernet, RJ45 connector
Serial Line Formats Characters: 7 or 8 data bits
Stop bits: 1 or 2
Parity: odd, even, none
Modem Control DTR, DCD, CTS, RTS
Flow Control CTS/RTS (hardware), XON/XOFF (software)
None
Management Internal web server (Standard Tunneling only)
SNMP (read only)
Serial login
Telnet login
Software Utility DeviceInstaller, Windows based configuration software
LEDs Ready, Fault/Configuration, Activity, Link, Serial Transmit, Serial Receive
Compatibility Ethernet: Version 2.0/IEEE 802.3
Isolation Ethernet: 1500 Vrms, Serial: 2000 Vrms Galvanic
Agency Approvals UL and CSA Class I, Division 2 Hazardous Locations, TUV, FCC, CE,
RCM, VCCI
To Next Page
Loading...
Need help?
General