5.1004.8641.0 B
Safety 1-3
• We always recommend to use the Lely Astri products for cleaning and disinfection, as their use in the
Lely system is proven and does not harm or damage the Lely equipment.
• Do NOT use chlorine, or other acids than phosphor and citric acid products in the cleaning system.
• Lely Industries N.V. is not liable for, and does not cover under warranty, any damage or harm due to
the use of other cleaning products not meeting the Lely specifications.
• Do NOT mix up the chemical products when you replace the jerry cans.
Use only the correct chemicals for a hot cleaning.
• The safety data sheets of the Lely products are available at www.lely.com
1.1.4 Operating Safety
• Read and understand the applicable manual and all safety signs before you connect power supplies to
operate, maintain or adjust the machine.
• Only trained persons are permitted to operate the machine.
• Do NOT use chlorine products in the cleaning system. Lely Industries N.V. is not liable for, and does not
cover under warranty, any damage or harm due to the use of other cleaning products in the cleaning
system which do not meet the Chemicals Specifications (see Acid based on page 2-1).
• Do NOT mix up the chemicals when you replace the jerrycans.
• Install all covers and guards before you operate the machine.
• Keep hands, feet, hair and clothing away from all moving parts.
• Keep unauthorized persons, especially small children away from the machine at all times.
• Before the pneumatic pressure is supplied to the machine, make sure all parts are tight and that all
hoses and fittings are in good condition.
• Make sure the cow detection camera is free of dirt and debris.
• Do not enter the operating area of the robot arm.
• Do not block the robot arm. It can move with sufficient force to cause injury to you and/or the cow.
• Do not help the machine when it is attaching the teat cups to the cow.
• All cows that can enter the milking robot, must have a tag. The cow data must be entered in T4C with
correct reproduction status and up to date health treatment information.
• Always be alert for unexpected movement of the cow. Cows can transmit large forces to parts of the
machine.
• Do not look directly into the laser light of the TDS II. Keep the working area as clean and as dry as
possible.
• Contact your nearest Lely service provider if you have any questions.
• Review safety related items with all operators frequently (annually).
1.1.5 Maintenance Safety
• Read and understand the applicable manual and all safety signs before you connect power supplies to
operate, maintain or adjust the machine.
• Only trained persons are permitted to maintain the machine. Technicians working on the machine must
be certified by Lely Industries N.V. The required level is at least Service Level 1.
in n o vato rs in agriculture
To Next Page
Loading...
Need help?
General