5.1004.8641.0 B
Maintenance 5-1
5 Maintenance
5.1 Preventive Maintenance Schedule
The following tables show the preventive maintenance schedule for the milking robot defined by Lely.
Preventive maintenance must also be done as specified by local regulations.
Each task mentioned in these tables is linked to its description.
The frequency of tasks shown in the table is the minimum recommended frequency.
Maintenance during the day
Task
Hours
Examine the attention alarms on the E-Link
8
Examine the attention list on the E-Link
8
Examine the attention alarms on the CRS+ (Examine the Attention Alarms, Show List
of Active Alarms).
8
Examine the attention alarms on T4C, refer to the T4C manual.
8
Examine the attention list on T4C, refer to the T4C manual.
8
Replace the filter element of the single filter.
8
Replace the filter element of the twin filter.
8–15
Clean the sTDS screen.
12
Clean the field of vision of the 3D camera.
12
Daily maintenance
Task
Day
Clean the touch screen of the E-Link
1
Clean the bleed holes
1
Clean the robot arm and the box
1
Clean the outside of the teat cups
1
Examine the cleaning brushes
1
Examine the twin tubes
1
Examine the 6-fold tube
1
Examine the cup centering
1
Examine the shells
1
Examine the quantity of udder care liquid
1
in n o vato rs in agriculture