5.1004.8641.0 B
Operating Instructions 4-1
4 Operating Instructions
4.1 Cleaning
4.1.1 Start Cleaning
1. On the E-Link select:
1. Button
to open the quick launch bar.
2. Button
to open the second set of the quick launch buttons.
3. Button
.
2. Choose a local cleaning or a cluster cleaning:
• For a Lelywash, select button Lelywash.
• For a Lelywash combined with a steam cleaning, select button Steam & LelyWash.
• For a local rinse, select button Local rinse.
• For a local rinse combined with a steam cleaning, select button Steam & local rinse.
• For M4Use Flush, See M4USE Flush on page 4-1.
• To clean the (visor/window) of the sTDS, select button sTDS cleaning.
• For a cluster rinse, select button Rinse and the applicable cluster [1] or [2].
• For a cluster cleaning, select the detergent button Alkaline or Acid or select Automatic at the
applicable cluster: [1] or [2].
3. Select button OK.
The milking robot starts to prepare the cleaning immediately and starts cleaning when the milking is
ready.
4.1.2 M4USE Flush
Hot water and steam.
Contact with hot water and steam may
cause burns.
During M4use flush, keep the M4USE cover
closed and keep safe distance.
in n o vato rs in agriculture