Appendix
11-63
BA9300SU EN 2.1
11.6 Glossary
Term Meaning
CE Communauté Européenne (English: European Community)
Code For entry and display (access) of parameter values.
Variable addressing according to the format ”code/subcode” (Cxxxx/xx).
All variables can be addressed via the code digits.
Contouring error Deviation between momentary position setpoint and actual position. Display for a momentary following error under C0908.
Contouring error monitoring Monitors the momentary following error if the contouring error tolerance is exceeded and releases a fault indication, if necessary.
Contouring error tolerance If the contouring error reaches a defined contouring error tolerance, a fault indication is released.
Ctrl. enable Controller enable
Ctrl. inhibit Controller inhibit ( = Controller enable )
Fieldbus For data exchange between superimposed control and positioning control, e.g. InterBus-S or PROFIBUS DP
GDC Global Drive Control (PC-program (Windows) for Lenze controllers)
INTERBUS Industrial communication standard to DIN E19258
LECOM Lenze Communication
LU Undervoltage
OU Overvoltage
PC Personal Computer
PM Permanent magnet
QSP Quick stop
RFG Ramp generator
Select target position The target which is to be approached by means of a defined traversing profile.
To Next Page
Loading...
Need help?
General
