Parameter setting
7-7
BA9300SU EN 2.1
7.2 Parameter setting using the keypad
7.2.1 Keypad
(Order no.: EMZ9371BB)
The keypad can also be plugged into the X1 interface and removed during operation.
When the keypad is plugged into the controller, the module is initialized. The keypad is ready to
operate after ”GLOBAL DRIVE READY” has been displayed.
Front view
Global DRIVE
SH PRG
Para
1250 rpm
0051
MCTRL-NACT
RDY
IMP Imax Mmax Fail
00
Fig. 7-1 Keypad
LCD display
SH PRG
Para
0051
RDY
IMP Imax Mmax
Fail
Status indications
Way of parameter
acceptance
Parameter
Tex t
Active level;
here: parameter level
Codenumber
Subcode number
Cursor
MCTRL-NACT
1250 rpm
00
Fig. 7-2 LCD display of the keypad
To Next Page
Loading...
Need help?
General
