Installation
4-1
BA9300SU EN 2.1
4 Installation
4.1 Mechanical installation
4.1.1 Important notes
• Use the controllers only as built-in devices!
• If the cooling air contains pollutants (dust, fluff, grease, aggressive gases):
– Take suitable preventive measures , e.g. separate air duct, installation of filters, regular
cleaning, etc.
• Observefreespace!
– You can install several controllers next to each other without free space in a control cabinet.
– Ensure unimpeded ventilation of cooling air and outlet of exhaust air!
– Allow a free space of 100 mm at the top and at the bottom.
• Do not exceed the ambient temperature permissible during operation. (
^
3-2)
• With continuous oscillations or vibrations:
– Check whether shock absorbers are necessary.
Possible mounting positions
Vertically on the control cabinet back panel with mains connections at the top:
• With enclosed fixing rails or fixing brackets. (
^
4-2)
• Thermally separated with external heat sink
– Punching
(
^
4-3)
–”Cold Plate technique” (
^
4-6)
To Next Page
Loading...
Need help?
General
