Configuration
8-3
BA9300SU EN 2.1
Example for a distribution of the control on terminals and RS232:
The main speed setpoint in the configuration C0005=1000 is to be controlled via LECOM A/B/LI. All
other inputs remain under terminal control.
1. Select C0780 via LECOM:
– C0780 is the configuration code for the main setpoint NSET-N in the function block ”Speed
setpoint conditioning” (NSET).
2. Assign a free control code via a selection number.
– e.g. 19515 (control code C0141)
The main speed setpoint is now controlled by C0141.
8.2.3 Configuration with Global Drive Control
With the PC program Global Drive Control (GDC)LENZE offers
• an easy to understand,
• well structured,
• convenient
tool for the configuration of your specific drive task.
Function block library
• GDC provides an easy-to-read library of available function blocks (FB).
• GDC also displays the complete assignment of a FB.
Signal configuration
The signal configuration is done with only one dialog box. It is a convenient way
• to display every FB as a block diagram.
• to see the assignment of all signal inputs at a glance.
• to enter the FB in the processing table.
• to print your signal configuration.
Terminal assignment
Freely assignable terminals can be configured using two dialog boxes:
• Dialog box - to link digital inputs and outputs.
• Dialog box - to link analog inputs and outputs.
To Next Page
Loading...
Need help?
General
