Error code Description Action
163.80 The motor (tray 3 pick) does not turn on. See
“Optional tray pick drive failure service
check” on page 147.
163.81 The motor (tray 3 pick) does not turn o.
163.82 The motor (tray 3 pick) speed did not ramp up to
the required level.
163.83 The motor (tray 3 pick) stalled.
163.84 The motor (tray 3 pick) ran too slow.
163.85 The motor (tray 3 pick) ran too fast.
163.86 The motor (tray 3 pick) ran too long.
164.80 The motor (tray 4 pick) does not turn on. See
“Optional tray pick drive failure service
check” on page 147.
164.81 The motor (tray 4 pick) does not turn o.
164.82 The motor (tray 4 pick) speed did not ramp up to
the required level.
164.83 The motor (tray 4 pick) stalled.
164.84 The motor (tray 4 pick) ran too slow.
164.85 The motor (tray 4 pick) ran too fast.
164.86 The motor (tray 4 pick) ran too long.
166‑168 error messages
Error code Description Action
166.80 The motor (tray 2 transport) does not turn on. See
“Optional tray pass‑through drive failure
service check” on page 148.
166.81 The motor (tray 2 transport) does not turn o.
166.82 The motor (tray 2 transport) speed did not ramp
up to the required level.
166.83 The motor (tray 2 transport) stalled.
166.84 The motor (tray 2 transport) ran too slow.
166.85 The motor (tray 2 transport) ran too fast.
166.86 The motor (tray 2 transport) ran too long.
167.80 The motor (tray 3 transport) does not turn on. See
“Optional tray pass‑through drive failure
service check” on page 148.
167.81 The motor (tray 3 transport) does not turn o.
167.82 The motor (tray 3 transport) speed did not ramp
up to the required level.
167.83 The motor (tray 3 transport) stalled.
167.84 The motor (tray 3 transport) ran too slow.
167.85 The motor (tray 3 transport) ran too fast.
167.86 The motor (tray 3 transport) ran too long.
7018
Diagnostics and troubleshooting
145