Lightware UCX-4x2-HC30 User Manual

 UCX series – User's Manual 124

Copy an EDID to User Memory
Command and Response
ç <source>:<destination>)
æ mO·
Parameters
Parameter Parameter description  
<source> Source EDID memory place
F1-F148
Factory EDIDs
U1-U100
User EDIDs
D1-D2
Dynamic EDIDs
<destination> The emulated EDID memory of the desired input port
U1-U100
User EDIDs
Example
ç 
æ 
Deleting an EDID from User Memory
Command and Response
ç <user_edid>)
æ mO·
Parameters
Parameter Parameter description  
<user_edid> The emulated EDID memory of the desired input port.
U1-U14
User EDIDs
Example
ç 
æ 
Resetting the Emulated EDIDs
Command and Response
ç 
æ mO·
Parameters
Parameter Parameter description  
<user_edid> The emulated EDID memory of the desired input port.
U1-U14
User EDIDs
Example
ç 
æ 
Calling this method switches all emulated EDIDs to factory default one. See the table in the Factory EDID
section.





Lightware UCX-4x2-HC30 Specifications

General

Brand	Lightware
Model	UCX-4x2-HC30
Category	Switch
Language	English