UCX series – User's Manual 49
Video & Audio Crosspoint
#crosspoint #switch
2
3
4
5
1
6
7
1
Main menu The available menu items are displayed. The active one is showed with
dark grey background color.
2
Information ribbon The label shows the device label which can be edited in the
Settings menu - Status tab.
3
Submenu selector The audio and video crosspoint menu and the USB crosspoint menu are
available under the two tabs.
4
Video input ports Each tile represents a video input port: , USB-C Inputs,
. The tile below the port shows the current crosspoint
setting; if the port is switched to the output, the color of the tile is white,
otherwise grey.
Clicking on the tile opens the input properties window.
5
Audio input ports Each tile represents an audio input port. All of them are logical audio ports,
inputs. For more details see Embedded Audio Input.
6
Audio output port Analog audio output port; clicking on the O3 tile opens the Analog Audio
Output window. The de-embedded audio is mirrored to the Dante Audio
Output in case of UCX-4x2-HC30D.
7
Video output ports HDMI video output ports; clicking on the tile opens the
port properties window.
8
Advanced view Displaying the , showing the Terminal window and
9
Properties
window
Settings and status information of the selected panel are displayed in this
section. Clicking on the icon the properties section opens in new
window.
q
Navigation button Device discovery window can be displayed by clicking on this button.
ATTENTION!
one of them can be selected to any output. Busy label on the crosspoint tile refers to the limitation.
I5 is selected for the video source, the de-embedded audio of the I1 is not available because of the video
crosspoint limitation. For more details about it see the port diagram in Audio Interface section.
TIPS AND TRICKS: Hover the mouse cursor to the information ribbon; the device label and the IP address of
the device will appear as a tooltip text.
To Next Page
Loading...
Need help?
General
