4. Installation UCX series – User's Manual 21
Mounting Options
the bottom side; see the bottom view in the Mechanical Drawings section. To order mounting accessories
please contact sales@lightware.com. Fasten the device by the screws enclosed to the accessory.
WARNING! Always use the supplied screws. Using different (e.g. longer) ones may cause damage to the
device.
1U High Rack Shelf
Allows rack mounting for half-rack, quarter-rack and pocket sized units.
1U high rack shelf provides mounting holes for fastening two half-rack or four quarter-rack sized units.
Pocket-sized devices can also be fastened on the self
Mounting the Device (with optionally available accessories)
The examples demonstrate the applications of UD Kit accessories:
Step 1. Turn the switcher and the power adaptor upside down.
Step 2. Fix the UD Mounting plate F100 to the switcher by fastening the screws (these 2pcs screws are supplied
with the switcher).
Step 3. Insert the power supply into the UD Mounting PSU F100.
switcher
UD Mounting plate F100
power supply
UD Mounting PSU F100
To Next Page
Loading...
Need help?
General
