Lightware UCX-4x2-HC30 User Manual

12. Appendix UCX series – User's Manual 162

Factory Default Settings
Parameter Setting/Value
Network settings
Factory default IP DHCP
Hostname lightware-<serialno>
HTTP, HTTPS Enabled
HTTP, HTTPS authentication Disabled
Authentication
Username admin
Video crosspoint settings
O1 (HDMI out 1) I1
O2 (HDMI out 2) I3
Audio crosspoint settings
O3 (Analog out) I1
USB crosspoint settings
H1 (USB hub) U1 (USB-C Host 1)
Video port settings
 true
 false
 I1, I2: HDCP 1.4; I3,I4: HDCP 2.2
DP Alternate Mode Policy Auto
Autoselect operation policy Disable autoselect
Signal type Auto
HDCP mode (in) - UCX-4x2-HC30(D) I1, I2: HDCP 1.4; I3,I4: HDCP 2.2
HDCP mode (in) UCX-2x1-HC30, UCX-2x2-H30 I1, I2: HDCP 2.2
HDCP mode (out) Auto
 On
Emulated EDID on all four inputs Factory #47: Universal HDMI PCM
Analog audio output port settings
 0.00 dB (100%)
Balance 0 (center)
Autoselect Follow video O1
USB port settings
 Equal output power
DP Alternate Mode Policy Auto
Port Power Role Dual Role
Autoselect Follow video O1
 Auto
RS-232 port settings
RS-232 port setting 9600 BAUD, 8, N, 1
RS-232 serial over IP Enabled
GPIO port settings
Output level High
Direction Input
Occupancy sensor
Sensor type Active high
Miscellaneous
Unique port names Cleared
Unique device label Cleared
User EDIDs Cleared
Applied Ports (Network Settings)

device and the softwares:
Purpose/function Protocol Port nr.
Firmware update TFTP
UDP 69
UDP 49990
UDP 49995
Device Discovery UDP 224.0.0.251:5353
Remote IP UDP 230.76.87.82:37421





Lightware UCX-4x2-HC30 Specifications

General

Brand	Lightware
Model	UCX-4x2-HC30
Category	Switch
Language	English