D9U001PPB-0101 95/106
Active
substance
Concentra-
tion
pH range Dwell time
Post
application
Recommendations for use
Hydrogen
peroxide
3 % 5 - 9 <5 mins Rinse well
and dry
Acceptable for use
Must be fully rinsed. Highly acidic or
alkaline peroxides should be avoided
as they will damage the coating.
Quaternary
Ammonium
Compounds
(QAS)
3 - 15 % 7 - 10 Varies
Refer to label
guidance
Rinse and dry Acceptable for use and
recommended subject to
precautions
Some Quaternary Ammonium
Compounds are too alkaline. Always
check the label first.
Quaternary solutions having a pH >10
are not recommended.
DO NOT USE QUATs (WIPES)
containing sodium hydroxide (NaOH).
Peracetic acid DO NOT USE
Iodophors DO NOT USE
Phenolics DO NOT USE
Steam
Sterilization
DO NOT USE
Dry heat DO NOT USE
11.3.4 Recommended chemical concentrations for disinfection the inner
covers
WARNING!
► Do not use disinfectants with active substance: alcohol over 30 %, active chlorine
over 5 000 ppm, iodine, aldehydes and phenols.
ACTIVE SUBSTANCE CONCETRATION
Amine. Alcohol up to 30 %
Hydrogen Peroxide 3 %
Alcohol up to 30 %
Glukoprotamine 0.5 %
Amine, QAS 0.5 %
Oxygen, QAS 1 %
Oxygen 1 %
Chlorine based disinfectants up to 5,000 ppm
To Next Page
Loading...
Need help?
General
