Logicube ZClone Xi User Manual

GETTING STARTED
Logicube ZClone™Xi User’s Manual 8
2.3 Drive Bay LEDs
Each bay has a DriveStation that has the following LEDs:
 Green LED
 OFF – The ZXi is not detecting a connection and is not supplying power to that bay.
 ON (Solid) – The ZXi is detecting a connection (drive or adapter) and is supplying power
to that bay.
 Yellow/Amber LED
 OFF – There is no activity to the drive/bay.
 ON (Blinking) – There is activity on the bay. Typically, this means that data is being read
from, written to, or the drive’s information is being accessed. This is typically blinking
when a drive is connected (while the ZXi is gathering drive information details) or during
any clone, wipe, or hash task as the ZXi is either reading from the drive or writing to it.
 ON (Solid) – This LED will turn solid if a drive that is being cloned to, hashed, or wiped
stops working, alerting that there may be a problem with the drive.
2.4 The User Interface
The user interface (UI) has been designed to quickly and easily input commands. It is simple and intuitive
showing common icons such as tasks, modes of operation, and scroll icons on the screen. The UI is
designed to be easily followed, going from left to right across the screen.

Logicube ZClone Xi Specifications

General

Brand	Logicube
Model	ZClone Xi
Category	Disc Duplicator
Language	English