Logicube ZClone Xi User Manual

QUICK START
Logicube ZClone™Xi User’s Manual 12
One or more Master drives can be cloned to one or more Target drives by using additional cloning
tasks. Any drive bay can be configured as a Master, Target, or both Master and Target. Details on how
to change the bay roles can be found in Section 5.9.4.
The ZXi clone, hash, and wipe speeds are determined by several factors including the
following:
- The manufacturer specifications of the drive(s) being used
- The age of the drive (manufactured date)
- How often that drive has been used
For example, a 2 TB drive with 64MB of cache produced by the manufacturer 2 years
ago is most likely slower than a 2 TB drive that the same manufacturer just released this
year, even though they are both 7200RPM with 64MB of cache and are both SATA III.
3.2.1 Step-By-Step Instructions – Clone
1. Select Clone from the types of operation on the left side.
2. Tap Mode and select Drive to Drive, Image to Drive, or Drive to Image then
tap the OK icon.
3. Tap the Master (or Image File) icon and choose the Master from the list of
connected drives then tap the OK icon.
4. Tap the Settings icon and adjust the settings as needed (Job Info, Clone Method
Settings, HPA/DCO, Error Handling, Hash/Verification Method, etc.) then tap
the OK icon.

Logicube ZClone Xi Specifications

General

Brand	Logicube
Model	ZClone Xi
Category	Disc Duplicator
Language	English