Logicube ZClone Xi User Manual

Logicube ZClone™Xi User’s Manual 77
9: ZXi-Laptop Cloning Version
9.0 ZXi-Laptop Cloning Version – Introduction
The ZXi-Laptop Cloning Version comes shipped with the ability to clone up to 6 laptops or computers (as
Master or Target) without removing the drives inside the laptops/computers.
If your previously purchased ZXi is not the ZXi-Laptop Cloning Version
and you would like to get the laptop cloning ability described in this
chapter, please contact Logicube Sales at sales@logicube.com.
Using the ZXi-Laptop Cloning Version requires the
laptop or computer to have a wired Ethernet connection
and an available USB 2.0 or 3.0 Type A receptacle/port.
The ZXi-Laptop Cloning Version will be shipped with the following:
 Eight (8) Cat6 Ethernet cables.
 Two (2) Gigabit Ethernet switches (with AC adapter/power supply).
 Six (6) built-in USB cables located in the back of the ZXi.
9.1 Requirements
Using the ZXi-Laptop Cloning Version requires the following:
 Desktops or laptops must be an x86 based Windows or Mac.
 Tablets must have Windows and is x86 based.
 All devices must have at least one available USB 2.0 or 3.0 Type A receptacle/port.
 All devices must support booting up from a USB flash drive.
 All devices must have support for a wired Ethernet connection (either through a built-in Ethernet
port or an Ethernet adapter).
Tablets may require a docking station with a wired Ethernet
port. Alternatively, it may be possible to use a USB-to-Ethernet
adapter, but the laptop must support that configuration.

Logicube ZClone Xi Specifications

General

Brand	Logicube
Model	ZClone Xi
Category	Disc Duplicator
Language	English