LS tractor MT235E 2020 User Manual

5 -30
5-7. Every 50 hour check
Lift-rod
Top link
Grease nipple
Grease nipple
Stabilizer
(2) Cleaning of Radiator and Radiator screen

See chapter 5-6-(7) in this manual (See page 5-25).
Grease nipple
1.Wipe dirt from fittings before greasing.
2.Use a grease gun containing clean high grade of
grease.
For grease specification, see chapter 5-3,
“Lubricants and Capacity” or the last page in this
manual.
3.Pump fresh grease into fitting to adequately
lubricate the component and force out any
contamination from the grease passage.
4.Wipe off excess grease.
Clutch lever shaft
(1) Lubricating grease nipple
 Steering cylinder pins.
 Front axle pivot.
 Thread or sliding parts on 3-point linkage.
 Clutch lever shaft (Both sides for Mechanical
models)

LS tractor MT235E 2020 Specifications

General

Brand	LS tractor
Model	MT235E 2020
Category	Tractor
Language	English