3 -12
①
(5) Hazard warning light switch
This is used to warn other vehicles in case of
emergency status.
This function is integrated to the light switch for
USA market.
If turning the light switch① once clockwise, all
turn signal lights② are blinked.
When turning the light switch to “Low beam”
position, the hazard warning light is
automatically turned on.
Use this hazard warning light switch in
emergency situations according to your local
traffic regulation.
If the hazard warning lights are operated at the
same time when the turn signal is activated, the
hazard warning light for the opposite side of
turning direction will stop flashing and illuminate
continuously.
Light switch
2 2
▶If using the hazard warning lights for a long time while the engine is stopped, the
battery can be discharged due to high electrical power consumption.
▶The hazard warning lights can be turned on regardless of the key switch position.
Notice
Caution