3 -9
(2) Key switch
OFF - power off (engine stop)
ON/Preheat - power on & automatic glow
START - engine start
As soon as the engine starts, turn the ignition
key to “ON” position immediately. If not, it may
cause damage to the starter motor.
Key switch
OFF
Start
ON/Preheat
▶ Because a safety switch for start-up has to be engaged, put PTO switch to “OFF”
position and depress clutch pedal(If fitted) fully and then turn the key switch to
“Start” position. See chapter 4-2-(1), “Engine Start” in this manual.
▶ If the tractor is not in use, the ignition key should be removed.
Caution
To Next Page
Loading...
Need help?
General
