LS tractor R3039H User Manual

Caution
▶ Check each part before starting
engine.
▶ Check if there is some other
people around before starting.
▶ Place all the levers and switches in
NEUTRAL or OFF position.
4. Operation and Work
4-1. Engine start and stop
(1) Engine start
Mechanical type
1. Sit in the
driver’s seat and
apply the parking
brake lever.
2. Place the main gear shift lever,
range gear shift lever, shuttle lever in
NEUTRAL and PTO switch in OFF
position.
3. Push the throttle
lever to the middle
position of the full
throttle.
4. Turn the key switch
to ON and check if
engine oil pressure
indicator, battery
charging indicator, cold
start aid indicator is ON.
Mechanical type
Clutch pedal
Brake pedal
Throttle pedal
Differential
lock pedal
Shuttle lever
Range gear
shift lever
Throttle lever
4
4 4
4 - 1
5. Wait until cold start
aid indicator is OFF.
(about 10~15 seconds)
6. Depress the clutch
pedal fully and turn the key
switch to START position.
As soon as the engine
starts, release the key
switch to ON position.
7. Check if engine oil pressure
indicator and battery charging
indicator are OFF. If any
indicator is ON, stop the
engine immediately and check.
8. Run engine for a few
minutes to warm up the
engine oil and
transmission oil.
4WD lever
Main gear
shift lever
shift lever

LS tractor R3039H Specifications

General

Brand	LS tractor
Model	R3039H
Category	Tractor
Language	English