LS tractor R3039H User Manual

(2) Replacing Hydraulic Oil Filter
①
①①
① Hydraulic oil filter (Main)
 Park tractor on level surface and apply parking
brake and lower implements and stop the engine.
 Carefully clean around the filter and set a clean
container under the filter.
 Coat clean hydraulic oil on the packing of new
filter and check the packing is placed well in the
groove.
 Turn the oil filter CCW to remove with filter wrench.

Turn the new filter CW to assemble until the packing makes contact with the mounting surface.
Hydraulic
oil filter
Open
Close
 Replace the HST filter according to the same
procedure of the hydraulic oil filter.
②
②②
② HST filter

Turn the new filter CW to assemble until the packing makes contact with the mounting surface.
Tighten CW from ¾ to 1 turn more after packing contact.
 Run the engine at idle and check any leakage.
 Check the oil level. If necessary, add new oil.
HST filter
Open
Close
5
5 5
5 - 19
▶ Be sure to stop the engine before loosening the oil filter.
▶ If the filter or oil is very hot, it may cause serious burns. After cooling down the
tractor sufficiently, replace the filters.
Warning

LS tractor R3039H Specifications

General

Brand	LS tractor
Model	R3039H
Category	Tractor
Language	English