5 -6
5-3. Lubricants and Capacity
Lubricants Capacity International Standard
Recommended
products
Engine coolant
(Radiator)
4.9 L
(1.3 U.S.gals.)
ASTM D5216
Soft water (50%) +
Anti-freeze (50%)
Fuel
28 L
(7.4 U.S.gals.)
ASTM D975 No.2
Ultra low sulfur
diesel fuel
Engine oil
(Crank case)
4.2 L
(1.1 U.S.gals.)
API CF-4 or CG-4
KIXX DL
(Manufacturer :
GS Caltex)
Transmission oil
(common use for
hydraulic lift and
steering system)
32 L
(8.5 U.S.gals.)
API GL4
ISO VG 46/68
LSTH570
( Manufacturer :
GS Caltex or S-OIL
TOTAL Co. Ltd.)
Front axle oil
6.5 L
(1.7 U.S.gals.)
API GL4
SAE 80W
EPK 80W90
(Manufacturer :
S-OIL TOTAL Co. Ltd.)
Grease
(Front axle holder,
Steering cylinder pin,
3-point linkage, etc.)
Proper
amount
NLGI 2
Starting
Temperature
℃(℉)
Oil
Viscosity
-30
(-22)
-25
(-13)
-20
(-4)
-15
(-5)
-10
14)
-5
(23)
0
(32)
-10
(50)
20
(68)
30
(86)
40
(104)
SAE 10W-30
SAE 15W-40
SAE 5W-20
RECOMMENDED OIL VISCOSITIES
The correct engine oil viscosity grade is dependent upon ambient temperature. Refer to the chart below
when selecting oil for your tractor engine.
In areas where prolonged periods of extreme temperatures are encountered, local lubricant practices
are acceptable; such as the use of SAE 5W 30 in extreme low temperatures or SAE 50 in extreme high
temperatures.
To Next Page
Loading...
Need help?
General
