4 -11
(6) Parking
z Stop the tractor on a level surface, not a slope.
z Disengage PTO and place all the transmission
shift levers in NEUTRAL position.
z Lower the mounted implements on the ground.
z Apply parking brake.
z Stop engine and remove ignition key.
z Before you leave the operator’s station, wait for
engine and all moving parts to stop.
z Have to apply the wheel chocks when parking
the tractor on a slope unavoidably.
▶If it is necessary to park the tractor on a slope, furthermore with loaded trailer, the
tractor may roll down, even though the parking brake is applied. In this case, apply
all the gears in lowest speed and apply chocks or blocks to all the tires.
- Mechanical : downward slope ⇒ reverse 1 gear / upward slope ⇒ forward 1 gear.
- HST type : Apply the lowest gear of the range gear lever.
Caution
To Next Page
Loading...
Need help?
General
