5 -28
①
Fuse check and replacement
z
How to change the fuse
1. Remove the cover of fuse box.
2. Check each fuse and remove the damaged
fuse.
3. Change with new one same as damaged one.
z
Chassis fuse box is installed inside front console
in the right figure.
z
The capacity and function of each fuse is
described on the fuse box cover.
(2) Fuse & Main fuse
▶
If the same function fuse is damaged often, contact your authorized local dealer for
check instead of using the alternatives such as wire or aluminum foil.
▶
If using the alternatives instead of the rated capacity fuse, it may cause fire which
results in the damage of tractor or injury.
Notice
Fuse box
for chassis
Fuse Capacity Circuit
F1 10A Engine stop, Alternator, HST relay (if fitted)
F2 10A Instrument panel, horn, glow relay
F3 20A Headlights, brake lights, side lights
F4 15A Work lights
F5 10A PTO
F6 10A Controller (if fitted)
F7 10A Spare
F8 15A Turn signal lights
F9 15A Hazard warning lights
spare
spare
spare
To Next Page
Loading...
Need help?
General
