3 -12
(15) Cruise control lever (HST
Type)
z For cruise drive, push down the cruise control
lever with pressing the HST forward pedal. And
then, the HST pedal shall be fixed at that
position and the driving speed of the tractor shall
be maintained constantly.
z To exit the cruise control drive ;
1) Press the brake pedal down or
2) Press the HST pedal forward little more.
And then, the HST pedal returns to the neutral
position and the cruise drive shall be stopped.
▶ During the cruise drive, DO NOT press the HST reverse pedal to release the cruise
drive or to reverse the tractor. After stopping the cruise drive as above described,
use the HST reverse pedal.
▶ DO NOT try to raise the cruise control lever up to quit the cruise control drive. It
may cause a failure of the cruise control linkage system.
warning
Cruise control lever
Cruise drive
Release
HST forward
pedal
To Next Page
Loading...
Need help?
General
