5 -24
(1) Replacing Engine coolant
z
After cooling down the engine enough, open the
radiator cap slowly.
z
Set a clean container under radiator drainage
cock.
Warning
▶
When opening the radiator cap,
be careful of the escaping hot
water or steam.
▶
Cool down the coolant
sufficiently before opening.
z
Loosen radiator drainage cock and drain engine
coolant completely.
z
Before adding new coolant, wash out the
radiator with clean water 2~3 times.
z
Apply the overflow tube and add new coolant up
to the filler neck. Fill up the expansion tank with
coolant between “LOW” and “HIGH” marks.
z
For coolant specification, see section 5-3,
“Lubricants and Capacity” or the last page in this
manual.
z
Add clean soft water as the coolant, not hard
water like well water. If not, the radiator shall be
corroded or rusted.
z
Change the coolant with anti-freeze solution in
cold weather.
z
Anti-freeze solution is filled up from the factory.
After first winter, replace the engine coolant to
remove foreign materials.
Drainage cock
Radiator cap
5-9. Every 2-year check
Expansion tank
To Next Page
Loading...
Need help?
General
