EasyManuals Logo
Home>MAAX>Hot Tub>MXBP20

MAAX MXBP20 User Manual

MAAX MXBP20
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
44
Owners Manual
English
navigating down from there will allow the user
to cancel the pending change. Pressing the
“Select button will save or cancel the changes
and go back to the previous screen.
NOTE: If power is interrupted to the system,
you may have to reset your spas time.
ADJUSTING FILTRATION
MAIN FILTRATION
Using the same navigation and adjustment
as Setting the Time, Filter Cycles are set using
a start time and a duration. Each setting can
be adjusted in 15-minute increments. The
panel calculates the end time and displays it
automatically.
FILTER CYCLE 2 - OPTIONAL FILTRATION
Simply navigate to the Filter Cycle 2 line by
pressing the Right Navigation Button, and
when “NO is highlighted, press Up or Down
to toggle Filter Cycle 2 on and o. When Filter
Cycle 2 is ON, it can be adjusted in the same
manner as Filter Cycle1 by navigating to the
right. It is possible to overlap Filter Cycle 1 and
Filter Cycle 2.
CIRCULATION PUMP MODES
Some spas may be manufactured with Circ
Pump settings that allow programming
ltration cycle duration. Some circ Modes are
pre-programmed to operate 24 hours a day
and are not programmable.
PURGE CYCLES
In order to maintain sanitary conditions, as
well as protect against freezing, secondary
water devices will purge water from their
respective plumbing by running briey at the
beginning of each lter cycle.
If the Filter Cycle 1 duration is set for 24 hours,
enabling Filter Cycle 2 will initiate a purge
when Filter Cycle 2 is programmed to begin.
RESTRICTING OPERATION
The control can be restricted to prevent un-
wanted use or temperature adjustments.
Locking the Panel prevents the controller from
being used, but all automatic functions are
still active. Locking the Settings allows Jets
and other features to be used, but the Set
Temperature and other programmed settings
cannot be adjusted. Settings Lock allows
access to a reduced selection of menu items.
These include Set Temperature, Invert, Lock,
Utilities, Information and Fault Log. They can
be seen, but not changed or edited.
UNLOCKING
An Unlock Sequence using the navigation
buttons can be used from the Lock Screen. The
Unlock Sequence is the same for both Panel
Lock and Settings Lock. Press the following
buttons: SELECT - SELECT - DOWN ARROW.
WiFi-CONNECTIVITY
See pages 48-51 to read about your spas Wi-Fi
capabilities. Some spas are equipped with
full Wi-Fi. See your dealer for details if you are
unsure of what your spa should receive.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MAAX MXBP20 and is the answer not in the manual?

MAAX MXBP20 Specifications

General IconGeneral
BrandMAAX
ModelMXBP20
CategoryHot Tub
LanguageEnglish

Related product manuals