MAAX MXBP20 User Manual

53 Owner’s Manual
English
If the LCD
displays...
LF
drY
dr
SnT
SnH
SnS
Indicates...
Water ow
problem
- Persistent
ow problem
Lack of water
to the heater
Lack of water
to the heater
Heater sensor A
not functioning
Heater sensor B
not functioning
Heater sensors
are out of
balance
What happens...
Heater will shut down
while spa continues
to function normally
Heater will shut down
while spa continues
to function normally
Heater will shut down
while spa continues
to function normally
Spa automatically
deactivated
Spa automatically
deactivated
Possible cause...
- Plugged lter
- Low water
- Slice valve closed
- Blocked suction
return/lter/skimmer
- Slice valve closed
- Blocked suction
return/lter/skimmer
- Non-functioning
sensor
- Non-functioning
sensor
Corrective Action...
- Remove lter and clean
- Add water
- Contact dealer
- Open all jets
- Add water
- Contact dealer
- Open all jets/valves
- Remove blockage
- Add Water
- Open all jets/valves
- Remove blockage
- Contact dealer for
replacement sensor
- Contact dealer for
replacement sensor
- Contact dealer
Common LCD Messages
The following table denes other messages you will frequently see on the LCD display:
Message... What it is... What it means...
Pr -OR- RUN/ Priming mode Spa is in normal Priming Mode operation
PMPS/PURG/AIR/--
SLP Sleep mode Spa is in normal Sleep Mode operation
ECN Economy mode Spa is in normal Economy Mode operation
STD Standard mode Spa is in normal Standard Mode operation
ICE -OR- TOO COLD Freeze condition Heater will come on to keep water above 45°F
- - Water temperature Current water temperature not measured
WATR TOO HOT Water temperature Spa water is too hot, functions disabled

MAAX MXBP20 Specifications

General

Brand	MAAX
Model	MXBP20
Category	Hot Tub
Language	English