Manitowoc 777 User Manual

Reference Only
Manitowoc Published 10-01-12, Control # 044-05 v2 3-25
777 OPERATOR’S MANUAL OPERATING CONTROLS AND PROCEDURES
3
SEAT CONTROLS
FIGURE 3-10
ARMREST (unzip cover to expose screw
at rear of each armrest) -
BACKREST -
SEAT HEIGHT -
SEAT AND CONSOLE FORE-AFT
(adjusts seat and consoles) -
SEAT FORE-AFT (adjusts seat only) -
Avoid Damage!
Disconnect electric cord from rear
of right console before removing
seat from operator’s cab.
A794
Push release lever to left to unlock.
Using body pressure, slide seat and
consoles forward or rearward to desired
position. Release lever and make sure
it is latched.
Push release lever to left to unlock.
Using body pressure, raise and lower
seat to desired position. Release lever
and make sure it is latched.
Rotate knob to raise and lower
backrest to desired position.
Push release lever to left to unlock.
Using body pressure, slide seat
forward or rearward to desired
position. Release lever and make
sure it is latched.
Turn screws to raise and lower
armrests to desired position.
Armrests can be rotated up when not
needed.

Manitowoc 777 Specifications

General

Brand	Manitowoc
Model	777
Category	Construction Equipment
Language	English