Manitowoc Grove YB5520 User Manual

Grove Published 07-06-2017, Control # 406-03 2-3
CD5520/YB5520 OPERATOR MANUAL SAFETY INFORMATION
2
operator at all times and must remain in the cab (if equipped)
or operator’s station while the crane is in use.
The Operator Manual supplied with and considered part of
your crane must be read and completely understood by each
person responsible for assembly, disassembly, operation
and maintenance of the crane.
No personnel shall be allowed to climb onto the crane or
enter the crane cab or operator’s station unless performance
of their duties require them to do so, and then only with
knowledge of the operator or other qualified person.
Allow No One
other than the operator to be on the crane
while the crane is operating or moving, unless they are
seated in a two-man cab.
Do not remove the Load Chart, this Operator Manual, or
any decal from this crane.
Inspect the crane every day (before the start of each shift).
Ensure that routine maintenance and lubrication are being
dutifully performed. Don’t operate a damaged or poorly
maintained crane. You risk lives when operating faulty
machinery - including your own.
If adjustments or repairs are necessary, the operator shall
notify the next operator.
OPERATOR QUALIFICATIONS
Qualified person is defined as one who by reason of
knowledge, training and experience is thoroughly familiar
with crane operations and the hazards involved. Such a
person shall meet the operator qualifications specified in
Occupational Safety and Health Administration (OSHA)
Regulations (United States Federal Law), in ASME B30.5
American National Standard, or in any other applicable
federal, state or local laws.
Ensure that all personnel working around the crane are
thoroughly familiar with safe operating practices. You must
be thoroughly familiar with the location and content of all
placards and decals on the crane. Decals provide important
instructions and warnings and must be read prior to any
operational or maintenance function.
Refer to the Parts Manual for this crane for the locations of all
safety decals.
You must be familiar with the regulations and standards
governing cranes and their operation. Work practice
requirements may vary slightly between government
regulations, industry standards, and employer policies so a
thorough knowledge of all such relevant work rules is
necessary.
An untrained operator subjects himself and others to death
or serious injury.
You must not operate this crane unless:
• You have been trained in the safe operation of this
crane.
• You read, understand, and follow the safety and
operating recommendations contained in the
manufacturer’s manuals, your employer’s work rules,
and applicable government regulations.
• You are sure the crane has been inspected and
maintained in accordance with the manufacturer’s
manuals and is operating properly.
• You are sure that all safety signs, guards, and other
safety features are in place and in proper condition.
Do not attempt to operate the crane unless you are trained
and thoroughly familiar with all operational functions.
Controls and design may vary from crane to crane; therefore,
it is important that you have specific training on the particular
crane you will be operating.
Training is ESSENTIAL for proper crane operation. Never
jeopardize your own well-being or that of others by
attempting to operate a crane on which you have not been
trained.
Reference Only

Manitowoc Grove YB5520 Specifications

General

Brand	Manitowoc
Model	Grove YB5520
Category	Construction Equipment
Language	English