Safety is a combination of common sense, staying alert and knowing how your table saw
works.
WARNING: TO AVOID MISTAKES THAT COULD CAUSE SERIOUS INJURY, DO
NOT PLUG IN THE TABLE SAW UNTIL THE ENTIRE INSTRUCTION MANUAL HAS
HAVE BEEN READ AND FULLY UNDERSTOOD.
1. READ and become familiar with this entire instruction manual. LEARN the tool's
applications, limitations and possible hazards.
2. AVOID DANGEROUS CONDITIONS. DO NOT use power tools in wet or damp areas or
expose them to rain. Keep work areas well-tit.
3. DO NOT use power tools in the presence of flammable liquids or gas.
4. ALWAYS keepyour work area clean, uncluttered and well-tit. DO NOT work on floor
surfaces that are slippery with sawdust or wax.
5. KEEP BYSTANDERS AT A SAFE DISTANCE FROM the work area, especially when
the toot is operating. NEVER allow children near the toot.
6. DO NOT FORCETHE TOOL to do a job for which it was not designed.
7. DRESS FOR SAFETY. DO NOT wear loose clothing, gloves, neckties or jewellery
(rings, watches,) when operating the toot. They can get caught and draw you into
moving parts. ALWAYS wear non-slip footwear and tie back long hair.
8. WEAR A FACE MASK OR DUST MASK. Toot operation produces dust.
9. ALWAYS removethe power cord plug from the electrical source when making
adjustments, changing parts, cleaning or performing maintenance on the toot.
10.KEEPGUARDS IN PLACE AND IN WORKING ORDER.
11.AVOID ACCIDENTAL START-UPS. Make sure the power switch is in the OFF position
before plugging in the power cord.
12.REMOVEADJUSTING TOOLS. ALWAYS MAKE SURE all tools are removed from the
table saw before turning it on.
SAVE THESE SAFETY INSTRUCTIONS
To Next Page
Loading...
Need help?
General
