Use the arrow buttons to highlight the System panel option and press the Enter button.
In the System panel screen there are data display options. Use the arrow buttons to highlight a desired data selection. Press
the Enter button to check or uncheck a selection. Up to five selections can be checked.
Press the Menu button to navigate out of the System panel screen when all of the selections have been made. The System
screen will now display the current selections.
Smart Tow
Smart Tow is an easy to use program to manage boat acceleration and target speed goals for pulling skiers, tubers, or water
sport equipment of all varieties. Smart Tow takes the guesswork out of acceleration problems like too much hole shot, too much
overshoot, deceleration, and constant speed targets. Select a profile, select enable, and place the control handle to wide‑open
throttle, Smart Tow will do the rest.
Smart Tow is based on the engine RPM unless the vessel has a GPS installed and connected to the control area network.
Smart Tow offers five factory preset launch profiles, shown on the left side of the display as P1 through P5. Use the Up arrow
and Down arrow buttons to scroll through and highlight the profiles.
Profiles 1 and 2
Section 3 - Main Menu Selections
90-8M0124182 eng DECEMBER 2017 Page 33
To Next Page
Loading...
Need help?
General
