Declaration of Conformity
Mercury Marine declares that the following product to which this declaration relates is in conformity with the requirements of EU
directive 2014/30/EU (Electromagnetic Compatibility), and Section 182 of the Australian Radiocommunications
(Electromagnetic Compatibility) standard 2008, and satisfies all the technical regulations applicable.
The assessment has been carried out in accordance with Annex II of the above directive.
Product
Mercury Marine VesselView 403
This product has been tested to the following standards.
Standard
Standard Description
EN 60945:2002
Clause 9 and 10
Maritime Navigation and Radiocommunication Equipment and Systems —
General Requirements — Methods of Testing and Required Test Results
Test Report
Laboratory
Report Number
TÜV SÜD AMERICA INC. SD72119173‑0816 Rev.1
I, the undersigned, hereby declare that the equipment specified above conforms to the above Directives and standards for CE
marking for sale in the European and Australian communites.
Authorized Representative
Address
Mercury Marine, W6250 Pioneer Road, P.O. Box 1939 Fond du Lac, WI 54936‑1939
Signature
John Pfeifer, President, Mercury Marine
Date
10/01/2017
The attention of the purchaser, installer, or user is drawn to special measures and limitations to use which must be observed
when the product is taken into service to maintain compliance with the above directives. Details of these special measures and
limitations to use are contained in the appropriate product manuals.
VesselView Overview
IMPORTANT: VesselView is a multifunction display (MFD) that is compatible with products manufactured by Mercury Marine
Outboards, Mercury MerCruiser, Mercury Diesel. In addition, the VesselView software can be installed on compatible display
devices from Lowrance® and Simrad®. Some of the functions explained in this manual will be disabled depending on the
power package it is connected to.
VesselView is a comprehensive boat information center that can display information for up to two gasoline or diesel engines. It
continuously monitors and reports operating data including detailed information such as water temperature and depth, trim
status, boat speed and steering angle, and the status of fuel, oil, water, and waste tanks. VesselView can be fully integrated
with a vessel’s global positioning system (GPS) or other NMEA‑compatible devices to provide up‑to‑the‑minute navigation,
speed, and fuel‑to‑destination information. VesselView is a display extension for autopilot and joystick operations. All
functionality of these piloting features are controlled through Mercury Marine's autopilot control area network (CAN) pad or
joystick piloting control. VesselView will show if a mode of control is active or in standby; pop‑ups will appear as the vessel
arrives at waypoints, prompting response to turns. Additional display text can be used to adjust the engines and drives to
achieve maximum efficiency.
Display resolution
320 x 240 – H x W
Display type LED‑backlit optically bonded full‑color transflective TFT‑LCD
Display size 104 mm (4.1 in.)
Display viewing angle 170 degrees
Operating temperature –25 °C to 65 °C (–13 °F to 149 °F)
Operating temperature stored –40 °C to 85 °C (–40 °F to 185 °F)
Water resistance IPX7
Section 1 - Getting Started
Page 2 90-8M0124182 eng DECEMBER 2017
To Next Page
Loading...
Need help?
General
