Electrical connection
123
Disconnecting from the mains
Danger of electrical shock.
After disconnection, ensure the
appliance cannot be switched back
on
by mistake.
To disconnect the appliance from the
mains power supply, do one of the
following depending on installation:
Safety fuses
Completely remove fuses
Automatic circuit breakers
Press the (red) button until the middle
(black) b
utton springs out.
Built-in circuit breakers
Circuit breakers type B or C:
Switch the on/off switch fr
om 1 (on)
to 0 (off).
Residual current device (RCD)
Switch the main swi
tch from 1 (on) to
0 (off) or press the test button.
Replacing the mains
connection cable
If the mains cable needs to be replaced
it must be replaced with a specia
l
connection cable, type H 05 VV-F
(PVC-insulated), available from Miele.
To Next Page
Loading...
Need help?
General
